Potential gap in understanding cyanoHABs: Light-dependent morphological variations in colonial cyanobacterium Microcystis.

Colony formation is a crucial characteristic of Microcystis, a cyanobacterium known for causing cyanobacterial harmful algal blooms (cyanoHABs). It has been observed that as Microcystis colonies grow larger, they often become less densely packed, which correlates with a decrease in light penetration. The objective of this study was to investigate the effects of light limitation on the morphological variations in Microcystis, particularly in relation to the crowded cellular environment. The results indicated that when there was sufficient light (transmittance = 100 %) to support a growth rate of 0.11±0.01 day-1, a significant increase in colony size was found, from 466±15 µm to 1030±111 µm. However, under light limitation (transmittance = 50 % - 1 %) where the growth rate was lower than 0, there was no significant improvement in colony size. Microcystis in the light limitation groups exhibited a loose cell arrangement and even the presence of holes or pores within the colony, confirming the negative correlation between colony size and cell arrangement. This pattern is driven by regional differences in growth within the colony, as internal cells have a significantly lower frequency of division compared to peripheral cells, due to intra-colony self-shading (ICSS). The research demonstrates that Microcystis can adjust its cell arrangement to avoid excessive self-shading, which has implications for predicting and controlling cyanoHABs. These findings also contribute to the understanding of cyanobacterial variations and can potentially inform future research on the diverse phycosphere.

Biomimetic Mineralized 3D-Printed Polycaprolactone Scaffold Induced by Self-Adaptive Nanotopology to Accelerate Bone Regeneration.

Three-dimensional (3D)-printed biodegradable polymer scaffolds are at the forefront of personalized constructs for bone tissue engineering. However, it remains challenging to create a biological microenvironment for bone growth. Herein, we developed a novel yet feasible approach to facilitate biomimetic mineralization via self-adaptive nanotopography, which overcomes difficulties in the surface biofunctionalization of 3D-printed polycaprolactone (PCL) scaffolds. The building blocks of self-adaptive nanotopography were PCL lamellae that formed on the 3D-printed PCL scaffold via surface-directed epitaxial crystallization and acted as a linker to nucleate and generate hydroxyapatite crystals. Accordingly, a uniform and robust mineralized layer was immobilized throughout the scaffolds, which strongly bound to the strands and had no effect on the mechanical properties of the scaffolds. In vitro cell culture experiments revealed that the resulting scaffold was biocompatible and enhanced the proliferation and osteogenic differentiation of mouse embryolous osteoblast cells. Furthermore, we demonstrated that the resulting scaffold showed a strong capability to accelerate in vivo bone regeneration using a rabbit bone defect model. This study provides valuable opportunities to enhance the application of 3D-printed scaffolds in bone repair, paving the way for translation to other orthopedic implants.

Clinical Analysis of Microwave Ablation Combined with Decompression and Pedicle Screw Fixation in the Treatment of Spinal Metastases.

OBJECTIVES: There is still controversy over the choice of treatment for end-stage spinal metastases. With the continuous development of microwave technology in spinal tumors, related studies have reported that microwave combined with techniques such as pedicle screw fixation and percutaneous vertebroplasty can achieve the purpose of tumor ablation, relieving spinal cord compression, enhancing spinal stability, effectively relieving pain, and reducing recurrence rates. This study aimed to analyze the effectiveness of microwave ablation combined with decompression and pedicle screw fixation in the palliative management of spinal metastases with pathological fractures. METHODS: This retrospective study enrolled 82 patients with spinal metastases and pathological fractures treated between January 2016 and July 2020, with 44 patients undergoing pedicle screw fixation along with laminectomy (fixation group) and the remaining 38 receiving microwave ablation in addition to the treatment provided to group fixation (MWA group). Before surgery, all patients underwent pain assessment using the visual analogue scale (VAS) and evaluation of spinal cord injury using the Frankel classification. After surgery, the patients' prognoses were assessed using the Tomita score, modified Tokuhashi score system, and progression-free survival. Additionally, we compared operative time and blood loss between the two groups. Survival analysis utilized the Kaplan-Meier method with a log-rank test for group comparisons. Paired t-tests and the Mann-Whitney U test were applied to metric and non-normally distributed data, respectively. Neurological function improvement across groups was evaluated using the χ2 test. RESULTS: All patients were followed up for a median duration of 18 and 20 months in the fixation and MWA groups, respectively, with follow-up periods ranging from 6 to 36 months. Statistically significant reductions in postoperative VAS scores were observed in all patients compared with their preoperative scores. The MWA group exhibited reduced blood loss (t = 2.74, p = 0.01), lower VAS scores at the 1- and 3-month follow-ups (t = 2.34, P = 0.02; t = 2.83, p = 0.006), and longer progression-free survival than the fixation group (p = 0.03). Although the operation times in the MWA group were longer than those in the fixation group, this difference was not statistically significant (t = 6.06, p = 0.12). No statistically significant differences were found regarding improvements in spinal cord function between the two groups (p = 0.77). CONCLUSION: Compared with decompression and pedicle screw fixation for treating spinal metastases with pathological fractures, microwave ablation combined with decompression and pedicle screw fixation showed better outcomes in terms of pain control, longer progression-free survival, and lower blood loss without increasing operative time, which has favorable implications for clinical practice.

A review of biomacromolecule-based 3D bioprinting strategies for structure-function integrated repair of skin tissues.

When skin is damaged or affected by diseases, it often undergoes irreversible scar formation, leading to aesthetic concerns and psychological distress for patients. In cases of extensive skin defects, the patient's life can be severely compromised. In recent years, 3D printing technology has emerged as a groundbreaking approach to skin tissue engineering, offering promising solutions to various skin-related conditions. 3D bioprinting technology enables the precise fabrication of structures by programming the spatial arrangement of cells within the skin tissue and subsequently printing skin replacements either in a 3D bioprinter or directly at the site of the defect. This study provides a comprehensive overview of various biopolymer-based inks, with a particular emphasis on chitosan (CS), starch, alginate, agarose, cellulose, and fibronectin, all of which are natural polymers belonging to the category of biomacromolecules. Additionally, it summarizes artificially synthesized polymers capable of enhancing the performance of these biomacromolecule-based bioinks, thereby composing hybrid biopolymer inks aimed at better application in skin tissue engineering endeavors. This review paper examines the recent advancements, characteristics, benefits, and limitations of biological 3D bioprinting techniques for skin tissue engineering. By utilizing bioinks containing seed cells, hydrogels with bioactive factors, and biomaterials, complex structures resembling natural skin can be accurately fabricated in a layer-by-layer manner. The importance of biological scaffolds in promoting skin wound healing and the role of 3D bioprinting in skin tissue regeneration processes is discussed. Additionally, this paper addresses the challenges and constraints associated with current 3D bioprinting technologies for skin tissue and presents future perspectives. These include advancements in bioink formulations, full-thickness skin bioprinting, vascularization strategies, and skin appendages bioprinting.

Occurrence, Spatial Distribution, and Bioaccumulation of Dissolved Synthetic Musks in Freshwaters across China.

Commercial chemicals, such as synthetic musks, are of global concern, but data on their occurrence and spatial distribution in aquatic environments of large scale are scarce. Two sampling campaigns were conducted in the present study to measure freely dissolved synthetic musks in freshwaters across China using passive samplers, along with biological coexposure at selected sites. Polycyclic musks (PCMs) dominated synthetic musks, with a detection frequency of 95%. Higher concentrations of PCMs were observed in densely populated Mid, East, and South China compared to less populated regions, indicating the significance of anthropogenic activities for synthetic musks in water. The concentration ratios of galaxolide (HHCB)/tonalide (AHTN) were significantly higher in low-latitude areas than in high-latitude areas from June to September, suggesting that solar radiation played an important role in the degradation of HHCB/AHTN. Significant correlations were found between dissolved concentrations of HHCB and AHTN and their lipid-normalized concentrations in coexposed fish and clam. The estimated hazard quotients for HHCB and AHTN in freshwater fish consumed by humans were less than 0.01 at all sampling sites except the Yangtze River Basin. These results help to understand the environmental fate and ecological risks of synthetic musks on a large geographical scale.

An integrated approach to assess human health risk of neonicotinoid insecticides in surface water of the Yangtze River Basin, China.

Neonicotinoids are widely used insecticides that have raised considerable concerns for both environmental and human health. However, there lack of comprehensive evaluation of their accumulation in surface water ecosystems and exposure to various human groups. Additionally, there's a distinct lack of scientific evidence describing the carcinogenic and non-carcinogenic impacts of neonicotinoids from surface water. Using an integrated approach employing the Relative Potency Factor (RPF), Hazard Index (HI), and Monte Carlo Simulation (MCS), the study assessed neonicotinoid exposure and risk to four demographic groups via dermal contact and mistaken oral intake pathways in the Yangtze River Basin (YRB), China. Neonicotinoid concentrations range from 0.1 to 408.12 ng/L, indicating potential risk (10-3 to 10-1) across the studied demographic groups. The Incremental Lifetime Cancer Risk (ILCR) for dermal contact was within a moderate range of 2.00 × 10-3 to 1.67 × 10-2, while the mistaken oral intake was also within a moderate range of 3.07 × 10-3 to 7.05 × 10-3. The Hazard Index (HI) for dermal exposure ranged from 1.49 × 10-2 to 0.125, while for mistaken oral intake, it varied between 2.69 × 10-2 and 0.14. The findings highlight the importance of implementing specific interventions to address neonicotinoid exposure, especially among demographic groups that are more susceptible. This research underscores the urgent need for targeted strategies to address neonicotinoid risks to vulnerable populations within the YRB while contributing to insights for effective policies to mitigate neonicotinoid exposure in surface water ecosystems globally.

Nano-Topographically Guided, Biomineralized, 3D-Printed Polycaprolactone Scaffolds with Urine-Derived Stem Cells for Promoting Bone Regeneration.

Currently, biomineralization is widely used as a surface modification approach to obtain ideal material surfaces with complex hierarchical nanostructures, morphologies, unique biological functions, and categorized organizations. The fabrication of biomineralized coating for the surfaces of scaffolds, especially synthetic polymer scaffolds, can alter surface characteristics, provide a favorable microenvironment, release various bioactive substances, regulate the cellular behaviors of osteoblasts, and promote bone regeneration after implantation. However, the biomineralized coating fabricated by immersion in a simulated body fluid has the disadvantages of non-uniformity, instability, and limited capacity to act as an effective reservoir of bioactive ions for bone regeneration. In this study, in order to promote the osteoinductivity of 3D-printed PCL scaffolds, we optimized the surface biomineralization procedure by nano-topographical guidance. Compared with biomineralized coating constructed by the conventional method, the nano-topographically guided biomineralized coating possessed more mineral substances and firmly existed on the surface of scaffolds. Additionally, nano-topographically guided biomineralized coating possessed better protein adsorption and ion release capacities. To this end, the present work also demonstrated that nano-topographically guided biomineralized coating on the surface of 3D-printed PCL scaffolds can regulate the cellular behaviors of USCs, guide the osteogenic differentiation of USCs, and provide a biomimetic microenvironment for bone regeneration.

Recent advances in metal-organic frameworks for stimuli-responsive drug delivery.

After entering the human body, drugs for treating diseases, which are prone to delivery and release in an uncontrolled manner, are affected by various factors. Based on this, many researchers utilize various microenvironmental changes encountered during drug delivery to trigger drug release and have proposed stimuli-responsive drug delivery systems. In recent years, metal-organic frameworks (MOFs) have become promising stimuli-responsive agents to release the loaded therapeutic agents at the target site to achieve more precise drug delivery due to their high drug loading, excellent biocompatibility, and high stimuli-responsiveness. The MOF-based stimuli-responsive systems can respond to various stimuli under pathological conditions at the site of the lesion, releasing the loaded therapeutic agent in a controlled manner, and improving the accuracy and safety of drug delivery. Due to the changes in different physical and chemical factors in the pathological process of diseases, the construction of stimuli-responsive systems based on MOFs has become a new direction in drug delivery and controlled release. Based on the background of the rapidly increasing attention to MOFs applied in drug delivery, we aim to review various MOF-based stimuli-responsive drug delivery systems and their response mechanisms to various stimuli. In addition, the current challenges and future perspectives of MOF-based stimuli-responsive drug delivery systems are also discussed in this review.

Assessing neonicotinoid accumulation and ecological risks in the aquatic environment of Yangtze River Basin, China.

Neonicotinoids (NNIs) constitute commonly used pesticides across various regions, however, the lack of research and data on its long-term effects and threshold levels within specific ecosystems have left an important knowledge gap. This study aimed to comprehensively examine NNI concentrations and their potential impacts on human health and aquatic organisms in the region of the Yangtze River Basin (YRB). The study employed datasets on seven commonly applied NNIs across 244 surface water samples collected from 12 distinct geographic sites within the YRB. The relative potency factor was used to evaluate human exposure risks, while the species sensitivity distribution could estimate acute and chronic hazardous concentrations for 5% of species (HC5) for NNIs impacting aquatic organisms. Analysis revealed varying NNI concentrations across the sampled sites, with thiacloprid recording the lowest concentration at 0.1 ng L-1, and dinotefuran recording a high concentration of 408 ng L-1. The observation indicated NNI concentration declined at sampling sites downstream of the YRB. Infants were identified as the most vulnerable to NNI exposure, with an estimated daily intake of 40.8 ng kg-1 bw d-1. The acute HC5 was determined at 946 ng L-1 and a chronic HC5 at 338 ng L-1, to NNI hazards. These findings highlight the urgent need for a more comprehensive understanding of the ecological implications and hazards posed by NNIs within the YRB. Variations in NNI concentrations across sites, potential risks to human health, and increased vulnerability of aquatic organisms from this study underscore the necessity for further research and concerted efforts to mitigate these ecological threats in the region.

Analysis of intraoperative frozen section diagnosis of 1 263 pulmonary nodules / 中国胸心血管外科临床杂志

@#Objective    To explore the key points and difficulties of intraoperative frozen section diagnosis of pulmonary diseases. Methods    The intraoperative frozen section and postoperative paraffin section results of pulmonary nodule patients in Beijing Chaoyang Hospital, Capital Medical University from January 2021 to January 2022 were collected. The main causes of misdiagnosis in frozen section diagnosis were analyzed, and the main points of diagnosis and differential diagnosis were summarized. Results    According to the inclusion criteria, a total of 1 263 frozen section diagnosis results of 1 178 patients were included in the study, including 475 males and 703 females, with an average age of 58.7 (23-86) years. In 1 263 frozen section diagnosis results, the correct diagnosis rate was 95.65%, and the misdiagnosis rate was 4.35%. There were 55 misdiagnoses, including 18 (3.44%) invasive adenocarcinoma, 17 (5.82%) adenocarcinoma in situ, 7 (35.00%) mucinous adenocarcinoma, 4 (2.09%) minimally invasive adenocarcinoma, 3 (100.00%) IgG4 related diseases, 2 (66.67%) mucinous adenocarcinoma in situ, 1 (16.67%) atypical adenomatous hyperplasia, 1 (14.29%) sclerosing pulmonary cell tumor, 1 (33.33%) bronchiolar adenoma, and 1 (100.00%) papillary adenoma. Conclusion    Intraoperative frozen section diagnosis still has its limitations. Clinicians need to make a comprehensive judgment based on imaging examination and clinical experience.

Preparation and in vivo Distribution of Essential Oil from Alpinia zerumbet Fructus Encapsulated Nanoemulsions / 中国实验方剂学杂志

ObjectiveTo prepare oral nanoemulsions encapsulating essential oil from Alpinia zerumbet fructus（EOFAZ） and to investigate its pro-absorption effect in vitro and distribution in vivo. MethodThe proteoglycan conjugate polysaccharides of vinegar-processed Bupleuri Radix-bovine serum albumin（VBCP-BSA） was prepared by Maillard reaction of VBCP and BSA. Taking VBCP-BSA as emulsifier， vitamin B12（VB12） as absorption enhancer， and medium chain triglycerides mixed with EOFAZ as oil phase， the nanoemulsions loaded with EOFAZ was prepared by high energy emulsification method. The particle size， particle size distribution， surface Zeta potential， EOFAZ content and appearance and morphology of the nanoemulsions were characterized， and fluorescein tracer method was used to investigate the absorption effect of fluorescein-labeled EOFAZ nanoemulsions in vitro and their distribution in vivo. ResultVBCP-BSA was formed by Maillard reaction for 48 h with high grafting rate. Using VBCP-BSA as emulsifier， the homogeneous pink nanoemulsions was prepared and denoted as EOFAZ@VBCP-BSA/VB12. The particle size of the nanoemulsions was less than 100 nm and the particle size distribution was uniform. The surface of the nanoemulsions was a weak negative charge， and the shape was spherical. The encapsulation rate of the nanoemulsions for EOFAZ was greater than 80%， which had a good absorption effect in vitro and could enhance liver accumulation after oral administration. ConclusionThe designed proteoglycan nanoemulsions can effectively load EOFAZ， promote oral absorption and enhance liver distribution， which can provide experimental basis for the development of oral EOFAZ liver protection preparations.

Association between Life's simple 7 and rheumatoid arthritis in adult Americans: data from the National Health and nutrition examination survey.

Objective: The study aimed to investigate the relationship between Life's Simple 7 (LS7) and the risk of rheumatoid arthritis (RA) in adult Americans. Methods: A total of 17,532 participants were included in this study. The association between LS7 and the risk of RA was assessed using a weighted logistic regression model, with odds ratios (ORs) and 95% confidence intervals (CIs) calculated. Moreover, the nonlinear relationship was further characterized through smooth curve fitting (SCF) and weighted generalized additive model (GAM) analysis. Results: After adjusting for all covariates, the weighted logistic regression model demonstrated that the LS7 was negatively correlated with the risk of RA. Compared to quintile 1 of LS7, the OR between the risk of RA and quartile 4 of LS7 (LS7.Q4) was 0.261 (95% CI, 0.203, 0.337) in males under 50 years old, while in females of the same age group, the OR was 0.183 (95% CI, 0.142, 0.234). For females aged between 50 and 70 years old, the OR between the risk of RA and LS7.Q4 was 0.313 (95% CI, 0.264, 0.371). In females aged 70 years or older, the OR between the risk of RA and LS7.Q4 was 0.632 (95% CI, 0.486, 0.822). Conclusion: This finding suggested the healthy lifestyle behaviors represented by LS7 have a negative association with RA. However, further prospective studies are needed to verify the causal relationship in the results.

Worldwide risk assessment of phthalates and bisphenol A in humans: The need for updating guidelines.

Phthalates and bisphenol A (BPA) are compounds widely used as raw materials in the production of plastics, making them ubiquitous in our daily lives. This results in widespread human exposure and human health hazards. Although efforts have been conducted to evaluate the risk of these compounds in diverse regions around the world, data scattering may mask important trends that could be useful for updating current guidelines and regulations. This study offers a comprehensive global assessment of human exposure levels to these chemicals, considering dietary and nondietary ingestion, and evaluates the associated risk. Overall, the exposure daily intake (EDI) values of phthalates and BPA reported worldwide ranged from 1.11 × 10-7 to 3 700 µg kg bw-1 d-1 and from 3.00 × 10-5 to 6.56 µg kg bw-1 d-1, respectively. Nevertheless, the dose-additive effect of phthalates has been shown to increase the EDI up to 5 100 µg kg bw-1 d-1, representing a high risk in terms of noncarcinogenic (HQ) and carcinogenic (CR) effects. The worldwide HQ values of phthalates and BPA ranged from 2.25 × 10-7 to 3.66 and from 2.74 × 10-7 to 9.72 × 10-2, respectively. Meanwhile, a significant number of studies exhibit high CR values for benzyl butyl phthalate (BBP) and di(2-ethylhexyl) phthalate (DEHP). Moreover, DEHP has shown the highest maximum mean CR values for humans in numerous studies, up to 179-fold higher than BBP. Despite mounting evidence of the harmful effects of these chemicals at low-dose exposure on animals and humans, most regulations have not been updated. Thus, this article emphasizes the need for updating guidelines and public policies considering compelling evidence for the adverse effects of low-dose exposure, and it cautions against the use of alternative plasticizers as substitutes for phthalates and BPA because of the significant gaps in their safety.

Identifying priority PBT-like compounds from emerging PFAS by nontargeted analysis and machine learning models.

As traditional per and polyfluoroalkyl substances (PFAS) are phased out, emerging PFAS are being developed and widely used. However, little is known about their properties, including persistence, bioaccumulation, and toxicity (PBT). Screening for emerging PFAS relies on available chemical inventory databases. Here, we compiled a database of emerging PFAS obtained from nontargeted analysis and assessed their PBT properties using machine learning models, including qualitative graph attention networks, Insubria PBT Index and quantitative EAS-E Suite, VEGA, and ProTox-II platforms. Totally 282 homologues (21.8% of emerging PFAS) were identified as PBT based on the combined qualitative and quantitative prediction, in which 140 homologues were detected in industrial and nonbiological/biological samples, belong to four categories, i.e. modifications of perfluoroalkyl carboxylic acids, perfluoroalkane sulfonamido substances, fluorotelomers and modifications of perfluoroalkyl sulfonic acids. Approximately 10.1% of prioritized emerging PFAS were matched to chemical vendors and 19.6% to patents. Aqueous film-forming foams and fluorochemical factories are the predominant sources for prioritized emerging PFAS. The database and screening results can update the assessment related to legislative bodies such as the US Toxic Substances Control Act and the Stockholm Convention. The combined qualitative and quantitative machine learning models can provide a methodological tool for prioritizing other emerging organic contaminants.

A systematic review and meta-analysis of pollutants in environmental media.

Environmental pollutants are ubiquitous in our environmental media, resulting in detrimental impacts on both humans and the environment. An evidence-based review, particularly a systematic review and meta-analysis, performs a crucial function in assessing the pollution status of pollutants in environmental media at national and global scales. We selected and thoroughly investigated 76 papers focusing on systematic reviews and meta-analyses of contaminants in environmental media. The need to broaden the scope of studies was observed with an increase in the total number of publications, and there were greater focuses on food safety, water pollution, biological pollution, and environmental risks. Furthermore, this review outlined the fundamental procedures involved in a systematic review and meta-analysis, including literature searching, screening of articles, study quality analysis, data extraction and synthesis, and meta-analysis. A meta-analysis typically comprises fixed- and/or random-effects meta-analysis, identifying and measuring heterogeneity, sensitivity analysis, publication bias, subgroup analysis, and meta-regression. We specifically explored the application of meta-analysis to assess the presence of contaminants in environmental media based on two different pollutant categories, namely, non-biological and biological pollutants. The mean value is commonly utilized to assess the pooled concentration of non-biological pollutants, while the prevalence serves as the effect size of biological pollutants. Additionally, we summarized the innovative applications, frequent misuses, and problems encountered in systematic reviews and meta-analyses. Finally, we proposed several suggestions for future research endeavors.

Insights from colony formation: The necessity to consider morphotype when assessing the effect of antibiotics on cyanobacteria.

Colonial cyanobacteria have been identified as the primary contributor to the global occurrence of cyanobacterial harmful algal blooms (cyanoHABs), which are further intensified by the presence of "pseudo-persistent" antibiotics. Nevertheless, the impact of antibiotics on the growth and size of colonial cyanobacteria remains unclear. In this study, the response of cyanobacterium Microcystis to varying doses of antibiotics was assessed (0, 0.1, 0.5, 1, 10, and 50 µg L-1) by comparing the unicellular and colonial morphotypes. Interestingly, the morphological structure of cyanobacteria plays a significant role in their reaction to antibiotics. In comparison to the unicellular morphotype, the colonial morphotype exhibited a greater promotion in growth rate (11 %-22 %) to low doses of antibiotics and was less inhibited (-121 %--62 %) under high doses. Furthermore, antibiotics may affect the size of cyanobacterial colonies by disrupting the secretion of algal organic matter, which also exhibited a two-phase pattern. This work sheds light on the significance of methodology research involving both unicellular and colonial cyanobacteria. Future research and lake management should prioritize studying the morphological traits of cyanobacteria under different levels of antibiotic exposure. This approach may lead to novel strategies for predicting cyanoHABs under antibiotic pollution more effectively.

Risk factors and prediction model of nomogram for preoperative calf muscle vein thrombosis in geriatric hip fracture patients.

Introduction: Calf muscular vein thrombosis (CMVT) is a common complication in geriatric hip fracture patients. Despite its high incidence, prior research on the topic is limited. The occurrence of CMVT in patients will prolong the preoperative waiting time and even lead to serious thromboembolic events, which can be detrimental to the patient's prognosis. Therefore, this study aimed to identify the risk factors for preoperative CMVT in geriatric hip fracture patients and construct a nomogram model to predict the risk of preoperative CMVT in patients. Materials and methods: Geriatric hip fracture patients who underwent surgery between January 2019 and January 2022 were included. The patients were categorized into two groups depending on whether they had preoperative CMVT, confirmed through Color Doppler ultrasound or venography examination. Univariate and multivariate logistic regression analyses were used to analyze demographic characteristics, medical history, comorbidities, and laboratory tests. A nomogram was constructed to predict preoperative CMVT in geriatric hip fracture patients based on the results of the multivariate logistic regression. Results: Three hundred and eighty-eight geriatric hip fracture patients, including one hundred and thirty-four patients with CMVT and two hundred and fifty-four patients without CMVT, were ultimately included in our study. After multivariable logistic regression analysis, the time from injury to admission, smoking history, serum albumin levels, and D-dimer levels was identified as independent risk factors and was entered into a nomogram model. The nomogram showed robust discrimination, with an area under the receiver operating characteristic curve of 0.805. The calibration curve showed strong agreement between the CMVT probabilities predicted by the nomogram and the actual probabilities. The decision curve analysis illustrates the excellent clinical utility of the model. Conclusion: We have constructed a new nomogram prediction model that can effectively predict the risk of preoperative CMVT in geriatric hip fracture patients based on their medical history and blood test results. This model can help clinicians make individualized predictions of CMVT that are tailored to each patient's unique circumstances.

Design and fabrication of intracellular therapeutic cargo delivery systems based on nanomaterials: current status and future perspectives.

Intracellular cargo delivery, the introduction of small molecules, proteins, and nucleic acids into a specific targeted site in a biological system, is an important strategy for deciphering cell function, directing cell fate, and reprogramming cell behavior. With the advancement of nanotechnology, many researchers use nanoparticles (NPs) to break through biological barriers to achieving efficient targeted delivery in biological systems, bringing a new way to realize efficient targeted drug delivery in biological systems. With a similar size to many biomolecules, NPs possess excellent physical and chemical properties and a certain targeting ability after functional modification on the surface of NPs. Currently, intracellular cargo delivery based on NPs has emerged as an important strategy for genome editing regimens and cell therapy. Although researchers can successfully deliver NPs into biological systems, many of them are delivered very inefficiently and are not specifically targeted. Hence, the development of efficient, target-capable, and safe nanoscale drug delivery systems to deliver therapeutic substances to cells or organs is a major challenge today. In this review, on the basis of describing the research overview and classification of NPs, we focused on the current research status of intracellular cargo delivery based on NPs in biological systems, and discuss the current problems and challenges in the delivery process of NPs in biological systems.

Femoral neck system and cannulated compression screws in the treatment of non-anatomical reduction Pauwels type-III femoral neck fractures: A finite element analysis.

BACKGROUND: High shear force is a major factor detrimental to the healing of vertical femoral neck fractures. In addition to firm fixation, reduction quality is crucial for postoperative stability. The present study aimed to compare the biomechanical stability of the newly invented femoral neck system and three inverted-triangle cannulated compression screws treatments for non-anatomical reduction of Pauwels type-III femoral neck fractures. METHODS: A total of 18 non-anatomical reduction Pauwels type-III femoral neck fracture finite element models were fabricated and fixed using three inverted-triangle cannulated compression screws or the femoral neck system. A 1950-N force was applied to the femoral head to simulate the physiological load during a single-leg stance. Parameters of the maximum total deformation, the interfragmentary gap, and the maximum von Mises stress of the implants and the proximal femur were analyzed. FINDINGS: The results of the maximum total deformation, interfragmentary gap, and maximum von Mises stress of the implants in the negative-negative buttress model fixed by the femoral neck system were the largest among all groups (3.58 mm, 0.252 mm, and 729.68 MPa, respectively). In contrast, the anatomical-anatomical reduction model fixed by three inverted-triangle cannulated compression screws demonstrated the minimum total deformation, interfragmentary gap, and minimum von Mises stress of implants (1.107 mm, 0.09 mm, and 189.83 MPa, respectively). INTERPRETATION: Anatomical reduction or positive buttress in femoral neck fractures should be recommended during fracture reduction. The femoral neck system showed weaker biomechanical stability than three inverted-triangle cannulated compression screws in treating Pauwels type-III femoral neck fractures.

Associations of dietary oxidative balance score with femur osteoporosis in postmenopausal women: data from the National Health and Nutrition Examination Survey.

We used data from the NHANES to explore associations of DOBS with femur BMD and osteoporosis in postmenopausal women. We found that DOBS was positively associated with femur BMD and negatively associated with the risk of osteoporosis in postmenopausal women. PURPOSE: The study aimed to investigate the relationship between dietary oxidative balance score (DOBS) and the risk of osteoporosis in American postmenopausal women. METHODS: A total of 3043 participants were included in this study. The linear relationship between DOBS and femur BMD was evaluated using a weighted multivariate linear regression model. The association between DOBS and the risk of osteoporosis was assessed using a weighted logistic regression model, with odds ratios (ORs) and 95% confidence intervals (CIs) calculated. Moreover, the relationship was further characterized through smooth curve fitting (SCF) and weighted generalized additive model (GAM) analysis. RESULTS: After adjusting for all covariates, the weighted multivariable linear regression models showed a positive correlation between DOBS and femur BMD. Moreover, the weighted logistic regression model demonstrated that compared to the first tertile of DOBS, the highest tertile of DOBS was significantly associated with a lower risk of osteoporosis, with ORs of 0.418 (95% CI, 0.334, 0.522) for individuals under the age of 70 and 0.632 (95% CI, 0.506, 0.790) for individuals aged 70 or above. Similar trends were also observed in SCF and GAM models. CONCLUSION: The present study indicated that postmenopausal women with a higher DOBS have a lower risk of femur osteoporosis. This finding may highlight the potential protective role of an antioxidant-rich diet for the bones of the postmenopausal population. Moreover, DOBS may also be a valuable tool in identifying individuals with osteoporosis. Screening and early intervention for osteoporosis may be essential for postmenopausal women with low DOBS.